HX-220 Hydraulic Shear for 12–20t Excavators: a brand-new, lightweight design.In small to medium scrap yards, building demolition, and municipal works, many users operate 12–20 ton excavators. These machines cannot handle the weight or flow demand of large hydraulic shears, yet they still need enough cutting power to process 15–20mm thick steel plate, pipe, and sections.
To fill this gap, we are launching a high‑performance hydraulic shear specifically for 12–20 ton excavators – weighing only 1.7 tons but delivering cutting energy far beyond its size.
Compact Yet Powerful: 1.7 Tons – Easily Cuts 15–20mm Steel Plate
With a total weight of just 1.7 tons, this shear achieves an actual cutting capacity of 15–20mm mild steel plate (Q235/Q355) thanks to an optimized cylinder and cutting geometry. Whether it is scrap steel shells, H‑beam webs, or end‑of‑life vehicle frames, the shear makes clean, fast cuts.
“Small shear, big energy” – that is the core promise of this product.
Key Parameters: 580mm Opening, 510mm Blade Length
Maximum jaw opening: 580mm (22.8 inches) – enough to grip common scrap bales, car frames, and medium I‑beams.
Blade length (effective cutting edge): 510mm (20.1 inches) – wider cutting coverage per cycle, reducing the number of cuts required.
These dimensions represent a “large opening, long blade” configuration for the 12–20t attachment class, balancing grip capacity and cutting efficiency.
Wear‑Resistant Construction: Reinforced Arms + Xingcheng Wear‑Resistant 450
Smaller excavators often expose shears to more frequent lateral forces and impact loads. We have addressed this with specific reinforcements:
Reinforced shear arms – significantly thicker than comparable products, effectively resisting bending and torsional stress when cutting thick plate.
Steel grade: Xingcheng Wear‑Resistant 450 (HB450 equivalent), combining high hardness with good impact resistance – ideal for scrap with impurities, high strength, or heavy rust.
Continental Hoses: No Bursting, No Leaking Under High Temperature & High Pressure
Hydraulic hose failure – bursting, weeping, or hardening – is a top complaint in long, hot summer operations. This shear comes standard with Continental (formerly ContiTech / Manuli‑pattern) hydraulic hoses and seals:
High‑temperature resistance – stable in continuous high‑temperature environments (oil temperature up to 80–100°C), no softening or weeping.
High‑pressure capability – matches excavator maximum working pressure (typically 28–35 MPa), with pulse life far exceeding ordinary hoses.
Burst‑proof construction – multi‑layer steel wire braiding, safely absorbing occasional pressure spikes.
The result: even during 8–10 hour shifts in summer heat, users do not need to worry about hose‑related downtime or safety hazards.
Recommended Excavators & Typical Applications
Recommended excavator class: 12–20 tons (verify hydraulic flow; ideal range approx. 80–150 L/min)
Typical applications:
Small to medium scrap yards (dismantling end‑of‑life cars, motorcycles, agricultural machinery)
Interior demolition of steel buildings (cutting light H‑beams, C‑channels, pipework)
Municipal works (cutting rebar, I‑beam supports, temporary steel structures)
Shipbreaking (cutting hull plate, frames – suitable for smaller shipyards)
In Stock – Ready to Ship
This model is in volume production with ample stock available for immediate delivery. For detailed specifications, flow compatibility calculations, or an on‑site demonstration, please contact our sales team.
Defies summer heat, adapts to tough conditions. Give your 12–20 ton excavator real cutting power.